designed & dimensioned in millimeters[inches] cxx-xx-xx c1-d-et c2-b-gr v do not scale from this print scr2-17-xx-x-xx.xx-xx-xx plating -s: selective gold -f: flash selective gold -32 positions end 2 option cable length * -xx.xx (in meters) 00.25[9.84] min - 01.00[25.40] max -s1: socket body plastic latch -s2: socket body metal latch -bc: blunt cut -s: socket -t: terminal -d: double ended -bc: blunt cut -dk: double ended keyed polarization -mk: double ended keyed metal latch end 1 option ** **** **** **** (see table 1) assembled length: xx.xx + "b" 100 10 3.9 .4 cable length: xx.xx 2% 11.53 .454 ref cwp-1 (centered on cable 30[1.2]) fig. 1 scr2-17-32-x-xx.xx-s-s1 shown label-et 23.45 .923 ref 12.83 ref .505 42.04 1.655 ref 30.00 ref 1.181 ** -d option, do not design in. samtec will only support existing business as of rev d * -00.25, -00.50, and -01.00 are catalog standard lengths. for other lengths contact samtec. **** available to existing customers only; -dk is same as -s-s1. -bc is same as -s-bc. -mk is same as -s-s2. these end 1 options cannot be combined with end2 options sheet of unless otherwise specified, dimensions are in millimeters. tolerances are: decimals angles .x: 0.3 [.01] 2 .xx: 0.13 [.005] .xxx: 0.051 [.0020] material: unsealed circular 24 awg cable assembly by: scr2-17-xx-x-xx.xx-xx-xx dwg. no. description: proprietary note this document contains information confidential and proprietary to samtec, inc. and shall not be reproduced or transferred to other documents or disclosed to others or used for any purpose other than that which it was obtained without the expressed written consent of samtec, inc. do not scale drawing bratcher 09/28/2005 3 1 sheet scale: 1:1.33333 sub-scr2-17-32-01: pbt ipd1-16-d-k: pbt contacts: phos bronze spn-17-02: pa66 f:\dwg\misc\mktg\scr2-17-xx-x-xx.xx-xx-xx-mkt.slddrw notes: 1. represents a critical dimension. 2. note moved. 3. note deleted. 4. note deleted. 5. wiring to be pos 1 to pos 1, pos 2 to pos 2, pos 3 to pos 3, etc. 6. assembly to be 100% hi-pot tested at 1000v dc and assembly to be 100% tested for opens and shorts; after in-process 4 for -d and in-process 3 for -bc, then final assembly. after final electrical test, label each assembly with 1 label-et. 7. panel thickness: 0.08[.03] - 5.2[.205]. 8. assembly, including sub-scrx-17-xx, to be shipped in seal-top bags, see fig. 3, sheet 2. 9. minimum retention force: 11n[2 lbs]. 10. torque specification for nut on sub-scrx-17-xx is 12 in-lb. 11. note deleted. 12. note deleted. 13. refer to crimp specifications print for crimp and strip dimensions, tolerances, and tooling. 14. for lengths greater than 3.00 meters, contact samtec for electrical test data. 15. note deleted. 520 park east blvd, new albany, in 47150 phone: 812-944-6733 fax: 812-948-5047 e-mail: info@samtec.com code: 55322 revision v
39.70 ref 1.563 -s: socket 01 02 07 13 19 25 30 32 31 26 20 14 08 03 39.70 ref 1.563 -t: terminal 03 08 14 20 26 31 32 30 25 19 13 07 02 01 -s1: socket body plastic latch 01 16 32 17 -s2: socket body metal latch 01 17 32 16 (see table 1)(see note 6) assembled length=xx.xx + "b" c2-b-gr -bc: blunt cut (build double-ended initially for e-test) end 1 end 2 end 1 option end 2 option sheet of unsealed circular 24 awg cable assembly by: scr2-17-xx-x-xx.xx-xx-xx dwg. no. description: proprietary note this document contains information confidential and proprietary to samtec, inc. and shall not be reproduced or transferred to other documents or disclosed to others or used for any purpose other than that which it was obtained without the expressed written consent of samtec, inc. do not scale drawing bratcher 09/28/2005 3 2 sheet scale: 0.75:1 revision v f:\dwg\misc\mktg\scr2-17-xx-x-xx.xx-xx-xx-mkt.slddrw 520 park east blvd, new albany, in 47150 phone: 812-944-6733 fax: 812-948-5047 e-mail: info@samtec.com code: 55322
c3-e-mv 27.70 - 0.52 + 0.00 1.091 - .020 + .000 3.18 - 0.13 + 0.00 .125 - .0051 + .0000 14.98 - 0.13 + 0.00 .590 - .005 + .000 recommended panel hole (see note 7) cable shipped with panel mount hardware but not assembled together sub-scrx-17-xx (see table 1) (panel mount hardware) fig. 2 scr2-17-32-x-xx.xx-s-s1 shown as shipped -s: socket (in-process 1) contact (see table 1) sub-scr2-17-32-01 (see note 5) spn-17-02 wire (see table 1) 4.51 (typ) .177 -t: terminal (in-process 1) terminal (see table 1) wire (see table 1) spn-17-02 sub-scr2-17-32-02 (see note 5) -s1: socket body plastic latch (in-process 1) contact (see table 1) wire (see table 1) ipd1-16-d-k -s2: socket body metal latch (in-process 1) contact (see table 1) wire (see table 1) ipd1-16-d-k-m (see table 1)(see note 6) ((xx.xx + "b") x 2) + 51.0[2.00] (see table 1) cable length=("xx.xx" x 2) + 51.0[2.00] -bc: blunt cut (in-process 1) wire (see table 1) sheet of unsealed circular 24 awg cable assembly by: scr2-17-xx-x-xx.xx-xx-xx dwg. no. description: proprietary note this document contains information confidential and proprietary to samtec, inc. and shall not be reproduced or transferred to other documents or disclosed to others or used for any purpose other than that which it was obtained without the expressed written consent of samtec, inc. do not scale drawing bratcher 09/28/2005 3 3 sheet scale: 0.75:1 revision v f:\dwg\misc\mktg\scr2-17-xx-x-xx.xx-xx-xx-mkt.slddrw 520 park east blvd, new albany, in 47150 phone: 812-944-6733 fax: 812-948-5047 e-mail: info@samtec.com code: 55322
|
